New to an EFORT welding robot? Start with the teach pendant.
We made a one-page key guide for our customers. It shows every button on the EFORT pendant, what each one does, and which ones to leave alone.
🔑 Mode switch: Auto / T1 / T2. Always teach and jog in T1.
🛑 E-STOP: If anything looks wrong, press it first. Twist clockwise to release.
↔️ Jog keys: X / Y / Z / A / B / C. “–” is on the left and “+” is on the right.
⚡ PWR: Turns on servo power in Auto mode.
✋ Enabling switch (back of the pendant): Hold it halfway. If you let go or squeeze it all the way, the robot stops.
Safety first, then speed. A few minutes with this guide can save hours of troubleshooting on the shop floor.
💬 Running an EFORT robot from JTCLASER? Send us a message for the high-res guide or a remote training session.
#WeldingRobot #EFORT #TeachPendant #RobotWelding #IndustrialRobot #Automation #JTCLASER
... See MoreSee Less
21 hours ago
Classic Five-Direction Cutting
•Full-Area Verification: Covers the center and all four corners to check accuracy and consistency across the entire travel range.
•Reveals Mechanical Issues: Backlash, sticking, abnormal noise, and vibration in rails, screws, racks, and belts are more likely to show up in specific positions.
•Checks Optical Path and Focus: The beam path length varies by position, revealing focus drift and spot size changes.
•Tests Thermal Stability: Long runs show temperature rise in motors, drives, the laser source, and the chiller, as well as thermal deformation.
•Breaks In Moving Parts: All axes wear in evenly across their full travel, for more balanced wear.
•Validates Software and Control: Tests direction changes, acceleration/deceleration, and corner handling, exposing lost steps, overshoot, and synchronization errors.
•Easy Comparison: Samples from the five positions can be compared directly for size, cut edge quality, and burrs, so abnormal positions are quickly identified.
... See MoreSee Less
2 days ago
Calibration and nozzle cleaning, done in one shot. 🎯
✅ One-shot calibration: set up in seconds
✅ Automatic nozzle cleaning: stable quality, longer nozzle life
✅ Less hassle, more productivity
#welding #SpotWelding #laserwelding #manufacturing #metalworking #Automation #IndustrialEquipment
... See MoreSee Less
2 days ago
Another new customer site installation completed ✅
Wishing everyone: may your projects land smoothly and your profits flow like a river. Here's to more success and abundant opportunities ahead! 🤝💰
... See MoreSee Less
2 days ago