Our dual-robot coordinated setup goes beyond doubling fillet-welding productivity. Our goal is to achieve full-penetration groove welds in corner and butt joints without back gouging.
... See MoreSee Less
10 hours ago
Ground Rail Welding Robot Workstation
Each set of ground track welding workstation includes: arc welding robot, ground track walking mechanism, welding power supply, welding gun and water cooling system, vision system, intelligent welding system (standard configuration). The ground track length is 6 meters/9 meters, capable of X-axis displacement including ground track, gear rack, various linear guides, etc. The working range of the workstation in the Y-axis direction is 1.5 meters on each side, depending on the length of the track.
... See MoreSee Less
2 days ago
Welding inside a large bridge chord is tight, hot and slow work for any welder. So we sent in two robots instead.
✅ Dual-robot sync: both robots start and stop the arc at the same moment, so heat stays balanced and the part distorts less.
✅ Auto obstacle avoidance: the robots plan their own path around the stiffeners and keep welding in spaces where a person can barely fit.
The result: steady, repeatable seams inside the chord, and no welder crawling through a steel box all day.
Building bridges or heavy steel structures? Send us your drawing and we'll show you how a dual-robot cell would handle #roboticweldingl#BridgeConstructionc#steelstructurec#WeldingAutomationa#HeavyFabricationa#jtclaserLASER
... See MoreSee Less
4 days ago
Soldar dentro de un cordón de puente es un trabajo estrecho, caluroso y lento para cualquier soldador. Por eso mandamos dos robots.
✅ Robots sincronizados: los dos robots encienden y apagan el arco al mismo tiempo, así el calor se reparte por igual y la pieza se deforma menos.
✅ Evita obstáculos: los robots calculan su propia trayectoria alrededor de los rigidizadores y siguen soldando donde una persona apenas cabe.
El resultado: cordones de soldadura uniformes y repetibles dentro de la pieza, y ningún soldador metido en una caja de acero todo el día.
¿Fabrica puentes o estructuras metálicas pesadas? Envíenos su plano y le mostramos cómo lo resolvería una célula con dos robots.
#soldadurarobotizada #puentes #EstructurasMetálicas #AutomatizaciónIndustrial #calderería #jtclaser
... See MoreSee Less
4 days ago
