4.3 Software installation and usage 1. After RVCManager software is installed, it crashes immediately upon opening.。 ① Check whether antivirus software or the firewall has deleted any files or blocked the software. ② Verify whether the installed version of RVCManager is correct. For example, if the computer does not have

4.2 Camera Connection 1. The RVC camera cannot be detected in the Linux system. ① Check if the firewall is enabled. If it is, please disable the firewall. ② Check whether the camera’s power supply and network cable are properly connected and secured. ③ Check if the computer is configured

4 Common problems and solutions 4.1 Network Configuration 1. Are there any network requirements for using a GigE (Ethernet) camera? To use a GigE (Ethernet) camera, the network must be Gigabit or higher. Otherwise, insufficient bandwidth may cause issues with camera operation. As shown in the figure below, ensure the

3.5 Data Management 3.5.1 Device Management Go to the menu bar → Device → Device Management, or click Switch Camera. The shortcut button opens the Device Management pop-up window, where you can connect, disconnect, or switch cameras 3.5.2 Opening a file From the menu bar → File → Open File,

3.4 Parameter settings This section mainly introduces the components of parameter settings and how to adjust parameters to obtain ideal image data. Parameter settings are divided into five parts: Shooting Parameters, HDR Parameters, Post-Processing Parameters, Camera Functions, and Coordinate System Settings, which can be adjusted to improve point cloud capture