Co2 Automatic Nonmetal Laser Cutting & Engraving Machine
Fast, accurate cutting and engraving on almost any nonmetal — wood, acrylic, leather, textiles, rubber and more — with a narrow kerf, smooth edges and no damage to the workpiece.
China Co2 Automatic Nonmetal Laser Cutting & Engraving Machine Manufacturer
- High cutting accuracy
- Narrow cutting gap
- The cutting surface is smooth
- Cutting Fast
- Good cutting quality
- Don’t damage the material of the workpiece
- It is not affected by the density of the cut material
- It is not affected by the shape of the material being cut
- You can cut almost any nonmetal
- Save on Mold Investment
Co2 Automatic Nonmetal Laser Cutting & Engraving Machine Hot Sale
The Co2 Automatic Nonmetal Laser Cutting & Engraving Machine can meet any of your cut needs.
The CO2 Laser Cutting Machine adopts the international most advanced 64-bit high-speed DSP to set up the controller, the performance is greatly improved, the smooth S-type acceleration and deceleration control software design, the action is quick and steady, cooperate with the auto-fade technology different cutting part to achieve the ideal effect.
The positioning accuracy of CO2 cutting can reach 0.05 mm, the repeated positioning accuracy can reach 0.02 mm, and the slit is very narrow. The laser beam can focus a small light spot on the surface of the material, the material is quickly heated to the vaporized state, where it evaporates to form the desired shape, and the Surface roughness is generally controlled to within Ra12.5, without burrs.
The cutting speed of the CO2 laser cutting machine can reach 10m/min, the maximum speed can reach 70m/min, which is much faster than the speed of common wire cutting. Cutting quality is very high heat affected area is very small basically will not make the workpiece heating and deformation so as to avoid the workpiece in the process of cutting flat edge cutting gap without secondary processing.
The cutting head has an anti-collision function and will not contact with the workpiece will not scratch the workpiece, CO2 laser cutting machine with flexible function can be made according to a good pattern cutting, common materials that can be processed include plastics, wood, PVC, leather, textiles, and plexiglass.
Features
- The CO2 laser with high frequency and uniform power, which is developed by the top technology in our country, can output the laser power 24 hours continuously and uniformly, has abundant energy, and strong anti-interference ability!
- The CO2 laser cutting machine has a multi-document function: can store up to 500 work files, in the case of complete separation from the computer, users can be in engraving machine file selection, easy to achieve 128 different products of mass production.
- The optical system uses the national import specialized laser lens group configuration, six sets of lens combinations can be selected. The flight optical path has strong controllability to adjust the width of the seam and the perpendicularity of the cutting.
Applications
This type of machine is suitable for the clothing industry, shoe industry, home textile industry, embroidery industry, trademark industry, cloth toys industry, leather industry, luggage industry, umbrella industry, warp knitting industry, etc
Introduction of Co2 Automatic Nonmetal Laser Cutting & Engraving Machine System
- 1Adopt the international most advanced 64-bit high-speed DSP to build the controller, the performance is greatly improved.
- 2Smooth S-type acceleration and deceleration control software design, fast and smooth action.
- 3Technology of automatic light fading compensation.
- 4All cutting parts to achieve the desired effect.
- 5Continuous 24-hour uniform output, full of energy, anti-interference ability.
The material that can be cut by a Co2 laser cutting & engraving machine cutting Samples Under different Laser Working Modes
Wood, paper, cloth, leather. Organic glass, acrylic, wool, plastic, rubber, ceramic tile, crystal, jade, bamboo products, and other non-metallic materials.
The Features of Co2 Laser cutting system
The optical system is equipped with professional laser lens sets imported from China. Six sets of lens sets can be selected. The flight optical path has strong controllability to adjust the width of the seam and the perpendicularity of the cutting
Co2 Automatic Nonmetal Laser Cutting & Engraving Machine Accessories include.
JTC-1490 Laser cutting machine configuration
| Model | Working area (mm) | Contour dimension (mm) | Net weight(KG) |
|---|---|---|---|
| JTC-1490（150W） | 1400*900 | 2000*1550*1150 | 360 |
- 1Adopt the international most advanced 64-bit high-speed DSP to set up the controller, the performance is greatly improved, the smooth S-type acceleration and deceleration control software design, the action is quick and steady, cooperate with the auto-fade technology different cutting part to achieve the ideal effect
- 2The CO2 laser with high frequency and uniform power, which is developed by the top technology in our country, can output the laser power 24 hours continuously and uniformly, has abundant energy and strong anti-interference ability
- 3multi-document function: can store up to 500 work files, in the case of complete separation from the computer, users can be in engraving machine file selection, easy to achieve 128 different products of mass production.
- 4the adoption Korea six balanced imports straight line guide rail, the movement track is smoother, the precision is more accurate
- 5The optical system uses the national import specialized laser lens group configuration, six sets of lens combination can be selected. The flight optical path has strong controllability to adjust the width of the seam and the perpendicularity of the cutting
Suitable material
Wood, paper, cloth, leather. Organic glass, acrylic, wool, plastic, rubber, ceramic tile, crystal, jade, bamboo products and other non-metallic materials.
Applicable Industry
This type of machine is suitable for clothing industry, shoes industry, home textile industry, embroidery industry, trademark industry, cloth toys industry, leather industry, luggage industry, umbrella industry, warp knitting industry, etc.
Protective function
Co2 laser engraving machine three protection functions: safety protection function, filter protection function, water protection function
Technical Specification
| Laser power | 60－150w |
| laser type | CO2 separated glass tube laser, water cooled, 10.6 um |
| Laser Energy Control | Adjustable |
| Engraving speed | 0－64000（mm／min〉 |
| Cutting Speed | 25－36000（mm／min） |
| Cutting thickness | 0-30mm (plexiglass, other depending on material) |
| Minimum shaped text | Chinese characters (2 * 2, MM) , letters (1 * 1mm) |
| Resolution | ≤4000dpi |
| Positioning accuracy | ＜0.01 mm |
| Power | AC22OV±lO％，60HZ |
| Number of hanged line | 90 wire |
| Total power | ＜125OW |
| Operating temperature | 0℃-45℃ |
| Working humidity | 5-95% (no condensate) |
| Dichroic cutting | 256 layers of color separation cutting |
| Support for graphic format | DST AI CDR PLT DXF BMP NC JPGE |
JTC-1490 main configuration
| Configuration Name | Description | Quantity | Remark |
|---|---|---|---|
| Processing range | X：1400mm Y:900mm | 1 Set | Bed Aging, high-precision machining processing center |
| Cutting head | Quick-mount precision cutting head | 2 Sets | Single focusing lens system |
| Mechanical transmission system | The X/y axis is driven by a 3m belt | 2 Sets | CNFULO |
| X/y/uses imported straight line orbit | 3 trips | Taiwan | |
| Dedicated cooling system | The precision of temperature control is ± 0.5 °C. there are many kinds of alarm and protection functions: compressor delay protection, compressor over-current protection, water flow alarm, ultra-high temperature and ultra-low temperature alarm | 1 set | S&A |
| Motion control system | Offline control | 1 set | Self-development |
| X-axis, Y-axis stepper driver | 3DM580 | 2 sets | Joint venture |
| Control system | High resolution color screen | 1 set | standard configuration |
| Laser power supply | HY | 2 Set | China |
| Laser tube | RECI / WEESON | 2 | China |
| Machine wiring | High flexible drag chain cable | 3 | ECHU |
| lens | Imported reflector and focusing lens,from American II-VI incorporated USA | 2 sets | Can be wiped directly and replaced easily |
| Exhaust system | Down exhaust system | 1 set | Strong smoke extraction |
| Blanking collector | Collection of cutting stock/drawer type | Located under the bed | |
| Packaging | Export Wooden Packing | 1 Piece |
Note: the product configuration may change slightly with the improvement of the product. Please consult the sales staff for the accurate configuration.
Read all of the above on Co2 laser cutting machine introduction
To give you a better understanding of the CO2 laser cutting machine, take the 150 watt 1390 CO2 laser cutting machine as an example to show you the details of the CO2 laser cutting machine’s configuration, composition, Operation Principle, scope of application and purchase details:
| A | Model | JTC-1390 150W |
| B | Laser type | Glass tube sealed off CO2 laser |
| C | Laser output power | 150W |
| D | Laser tube brand | RECI |
| E | Processing format | 1300*900mm |
| F | Working platform | Electric lifting aluminum knife platform / honeycomb platform |
| G | Processing speed | Adjustable |
| H | Maximum engraving speed | 60000 mm/min |
| I | Maximum cutting speed | 6000 mm/min |
| J | Minimum engraving size | Chinese characters 2*2mm, letters 1*1mm |
| K | Positioning accuracy | ≤ 0.01mm |
| L | Driving mode | Lesai 57 stepping driver |
| M | Control mode | DSP |
| N | Communication interface | USB |
| O | System environment | Windows XP/ win7/8/10 |
| P | Supporting formats | BMP / AI / CDR / DXF / CAD / JPG / DST / DSX / LAS / PLT, etc |
| Q | Working offline | Support |
| R | Water protection and water cut-off alarm system | Support |
| S | Breakpoint continuation | Support |
| T | Applicable materials | Two color board, plexiglass, acrylic, wood board, paper, leather, cloth, rubber, marble, ceramic tile, shell, etc. |
| U | Applicable industries | Printing and engraving, clothing, leather goods, furniture, toys, advertising, decoration, architectural decoration, computer embroidery and cutting, packaging and paper industry |
| V | Cooling system | Water circulation cooling / forced water cooling system |
| W | Supporting software | Ruida 6442 / 6445 offline control system / CorelDRAW / Photoshop / AutoCad / various clothing CAD software |
| X | Power supply | AC110V / 220V ? 10% 50 / 60Hz |
| Y | Working environment | 5-40 (℃) 0-95% (RH) |
| Z | Lighting system | High brightness LED spotlight |
| A1 | Standard configuration | Full set of accessories, software / encryption lock / infrared / high power air pump |
| A2 | Accessories include | Cellular platform, knife blade platform, power cable, data cable, CD-ROM video tutorial, manual, certificate, exhaust fan, pump, exhaust pipe, file bag, software, etc |
| A3 | Optional | Forced water cooling circulation system / standard rotation / hardcover special-shaped rotation / industrial special-shaped rotation |
| A4 | Motion system | 57 step motion system |
| A5 | Packaging | Export packaging: thickened fumigated plywood export packaging |
| A6 | Size: net size (mm) weight (kg) wooden box packing size weight (kg) | 2100*1450*1115 400 2300*1600*1250 500 |
Frequently Customer Enquiry
Most frequent questions and answers about the handheld laser welding machine
What is a CO2 laser cutting machine and what can be done?
CO2 laser cutting machine is the use of Carbon dioxide laser cutting machine, this laser is a gas molecular laser, the laser wavelength is 10.6 microns, CO2 laser cutting machine is usually used in industrial production, yeah, wood, paper, fabric, leather. Organic glass, acrylic, wool, plastic, rubber, ceramic tile, crystal, jade, bamboo products, and other non-metallic materials for cutting laser equipment.
CO2 laser cutting machine can cut how much size of the product?
Strictly speaking, CO2 laser cutting machine working size has：6040,9060,1080,1290,1390,1490,1610,1810 private customization etc.For example, RECI tube
W1 75W 90W/ W2 90W 100W / W4 100W 130W / W6 130W 160W
What materials can CO2 laser cutting machine cut ?
Wood, paper, cloth, leather. Organic glass, acrylic, wool, plastic, rubber, ceramic tile, crystal, jade, bamboo products and other non-metallic materials.
Can large workpieces be cut by CO2 laser cutting machine?
Yes, it can be cut.
What is the cutting effect of the CO2 laser cutting machine?
The positioning accuracy of CO2 cutting can reach 0.05 mm, the repeated positioning accuracy can reach 0.02 mm, and the slit is very narrow. The laser beam can focus a small light spot on the surface of the material, the material is quickly heated to the vaporized state, where it evaporates to form the desired shape, and the Surface roughness is generally controlled to within Ra12.5, without burrs.
Does it need to be reprocessed after cutting?
Co2 laser cutting machine cutting quality is very good, no need to contact with the workpiece, cutting edge of small heat-affected, no deformation, 100% to avoid material collapse, the cutting seam does not need secondary processing.
What are the consumables for a CO2 laser cutting machine?
Aside from the glass tubes, there are no other consumables.
Is it safe to use a CO2 laser cutting machine?
CO2 laser cutting machine has three protective functions: safety protection function, filter protection function, and waterproof function, very safe and reliable!
Get A Quote Now!
We’d love to hear from you! Send us a message using the form below, or email us.