Welcome to Shaanxi Jingtai Cooperation Laser Technology Co
Choose the right equipment, solve welding problems and improve productivity—find practical answers for your workshop.
Posted on
Tags: MIG welding, robotic welding, Weld Defects, Welding Inspection, Welding Undercut
Learn the main welding undercut causes, how to prevent the defect in manual and robotic welding, and how to inspect and repair it correctly.
Posted on
MIG welding can look simple: pull the trigger, feed the wire, and move along the joint. Yet beginners often encounter the same three symptoms—porosity, excessive spatter, and an irregular bead. These defects usually come from a small group of setup and preparation errors rather than a…
Posted on
# Carbon Steel Robotic Welding Shielding Gas Selection and Parameter Setup Manual ## Purpose of This Manual This manual helps robot operators select shielding gas and establish practical starting parameters for gas-shielded arc welding of carbon steel. It applies mainly to automated GMAW/MAG cells using solid…
Posted on
Tags: CO2 welding, MIG welding, MIG welding settings, weld bead width, weld penetration, welding current and voltage, welding parameters, welding voltage formula
**MIG welding current and voltage** settings confuse many new welders because one small turn on the machine can change penetration, spatter, bead shape, and arc sound. If the current is too low, the weld may not fuse. If the voltage is wrong, the puddle may pile…
Posted on
Tags: intelligent welding, path planning, robotic welding selection, robotic welding system, seam tracking, welding automation, welding robot
Choosing the right **intelligent welding robot system** is one of the most consequential procurement decisions a fabrication shop can make — and one of the easiest to get wrong. Marketing claims have outpaced engineering reality, prices vary wildly, and the gap between what sellers promise and…
Feel free to inquire now. We are always here to help you.
