Liquid electrostatic coating
Robotic Electrostatic Spray Painting Workstation
Repeatable spray motion.
An integrated liquid-coating package.
Bring robotic motion and coating equipment together for repetitive liquid-paint applications. Configure the robot, spray gun and paint-supply system around your workpieces and production layout.
Proposed robot: 12 kg payload · 1,304 mm reach.
Final tooling, protection classification and integration scope are confirmed for your application.
Build a repeatable coating process
Start with your part and coating requirements, then define the complete spray package.
Repeat validated paths
Reuse agreed robot motion for recurring part geometries. Develop gun orientation, working distance and spray timing around the surfaces to be coated.
Coordinate the equipment
Plan the robot, gun, liquid-delivery system, regulators and hoses together, with a clearly defined scope of supply.
Match the liquid coating
Select electrostatic spray equipment to suit the paint, primer and solvent used in your process.
Configure the installation
Review part presentation, floor space and line interfaces before selecting the operating arrangement.
See robotic spraying in action
Watch a robot apply coating to suspended components in this application example.
Illustrative production-line footage. Conveyor-following functionality and the final equipment configuration are agreed separately for each project.
From your part to an agreed spray cycle
Review
Share drawings, coating details, part presentation and production requirements.
Configure
Define the robot, spray equipment, supply arrangement and installation requirements.
Trial
Develop paths and spray settings, then assess coverage and finish on representative parts.
Commission
Agree acceptance criteria and commission the confirmed scope for the production process.
Proposed robot and coating package
Use this configuration as the starting point for your application review.
| Coating process | Electrostatic liquid spray painting. |
|---|---|
| Robot payload / reach | 12 kg / 1,304 mm. Final tool, mounting and hose loads are checked during selection. |
| Installation | Floor-mounted arrangement. |
| Protection requirement | Explosion-protected robot required. The applicable classification and supporting documentation are confirmed for the installation. |
| Spray gun and controls | Automatic spray gun, regulator and hose package. Final electrostatic gun and control equipment are matched to the coating. |
| Paint delivery | Aluminium double-diaphragm pump with filtration and a three-way valve; final sizing to be agreed. |
| Paint supply | 50 L SS304 tank with a 1/4 hp agitator. |
| Primer supply | Separate 50 L SS304 tank with a 1/4 hp agitator. |
| Solvent supply | 25 L SS304 solvent tank / supply system. |
| Hose package | 10 m paint hose with connectors. Routing and material compatibility are confirmed for the installation. |
| Conveyor following | Available for application review; inclusion and interfaces remain subject to confirmation. |
| Supply scope | Robot and spray equipment supplied together, to the agreed bill of materials. |
Proposed configuration. Final component selection, protection documentation and coating compatibility form part of the project review.
Questions before choosing a spray workstation
Is this for liquid paint or powder?
This proposal is for electrostatic liquid spray painting. Share your paint, primer and solvent information so the spray and supply equipment can be selected for your process.
Is the robot suitable for an explosion-protected installation?
The project requires an explosion-protected robot. The required installation classification and the selected equipment documentation must be confirmed before the final configuration is agreed. A protective cover alone does not establish a protection rating.
Can it spray parts moving on a conveyor?
Conveyor following is subject to application review. Provide line speed, hanger pitch, part presentation and available control interfaces so the operating arrangement can be defined.
What production rate and finish can I expect?
Performance depends on part geometry, coating stages, line conditions and acceptance criteria. Agree the target film thickness, coverage, finish and throughput, then validate the process on representative parts.
What is included with the workstation?
The proposal includes the robot and application-matched spray equipment. The final quotation defines tanks, delivery components, controls and hoses, together with responsibilities for the booth, extraction, fixtures, utilities and curing.
Discuss your coating application
Show us the parts you need to spray
Send JTCLASER your requirements to discuss a workstation configuration and sample evaluation.
- Part photos, drawings, material and dimensions
- Paint, primer and solvent specifications
- Target coverage, film thickness and finish
- Production target, shifts and line layout
- Site protection requirements and existing equipment
Email project details to
dxk@jtclaser.com