Our Blog

Battery Tray Laser Weld Quality: 7 Reliable Checks

Posted on October 2, 2026

Tags: battery tray laser weld quality, technical buying guide, welding automation

Battery tray laser weld quality can improve when seam tracking keeps the laser and filler wire aligned with the actual joint, but tracking alone does not control contamination, fit-up, shielding, or every weld defect. Validate the complete process on representative assemblies, inspect the required characteristics, and…

Shipbuilding Wraparound Weld Automation: 7 Essential Quality Checks

Posted on October 2, 2026

Tags: shipbuilding wraparound weld automation, technical buying guide, welding automation

Shipbuilding wraparound weld automation uses measured geometry to plan the torch path around a stiffener end or corner where the drawing requires a weld return. Scanning can locate the real endpoint, but the complete solution must also validate torch orientation, access, process transitions, inspection, and safe…

Welding Robot Price: 7 Quality Checks Before You Buy

Posted on October 2, 2026

Tags: Duty Cycle, Robotic Welding Cost, Welding Equipment Selection, Welding Power Source, Welding Quality, Welding Robot Price

Compare welding robot quotations by power source quality, duty cycle, arc starts, acceptance testing and lifecycle cost before choosing the lowest purchase price.

Robot Seventh Axis Selection: Stiffness, Drives and Accuracy

Posted on September 29, 2026

How structural stiffness, residual stress, drive matching and installed alignment affect welding accuracy—and what to measure when selecting and accepting a robot track, cantilever or gantry.

Robotic Welding Torch Selection: Through-Arm vs External

Posted on September 27, 2026

Tags: External Torches, MIG Welding Equipment, Through-Arm Torches, Welding Torch Selection

Compare external and through-arm robotic welding torches. Check access, wire feeding, cooling, compatibility, costs, and acceptance before you buy.